LUMINOUS ECOWAAT 1113 MODEL NEW ORIGINAL LED PANEL

The Luminous Eco Watt 1113 (often part of the Neo or Rapid series) LED panel is essentially the “Information Hub” or display unit of your inverter. Its main job is to communicate the current status of the battery and the power supply to you.

​Here are a few simple examples of where and how it is used:

​1. Checking Power Supply (Mains)

• ​Example: If the ‘Mains’ LED is glowing, it means your house is receiving electricity from the grid. If this light goes off and the ‘UPS/Eco’ light turns on, it tells you that the power has cut and your appliances are now running on battery.

​2. Monitoring Battery Charging

• ​Example: When the power is back, the ‘Charging’ light will start blinking. This tells you that the inverter is successfully sending power into the battery. Once the battery is 100% full, the light usually stops blinking or stays solid.

​3. Overload Warning

• ​Example: If you accidentally turn on a heavy appliance (like a mixer or iron) while the inverter is on, the ‘Overload’ red light will glow. This warns you to switch off the extra load immediately to prevent the inverter from tripping or getting damaged.

​4. Low Battery Alert

• ​Example: If you have been using the backup for a long time, the ‘Low Battery’ light will flash. This is your signal to save your work or turn off non-essential lights because the battery is about to run out